OK PROWLER BIG GAME ROD POD HATCH

After looking online and not finding too much in the way of making this hatch, I decided to just do it and am quite pleased with the results. Plenty of room for rods and gear and slightly more room than the factory ones that have a wider hatch. More room to come after I make a fiberglass lid which will be narrower, stronger, and a better seal. I know this kayak is a little outdated but it has served me well as I am a pretty big guy and it floats me just fine. After making the cut, I filed the rough edge and applied automotive door trim moulding to dress up the edge. Hopefully this helps for those of us who have the Big Game Prowler still.

cool! sometimes you just gotta take the plunge and start cutting!  Can't wait to see the fiberglass cover.  I've thought of making one myself, but have no experience working with fiberglass. 

I've worked with Poly & Epoxy fiberglass more than I care to admit to.  It's quite fun & not all that expensive to teach yourself in a weekend.  Feel free to drop me a line if you ever want a few tips to get started learning 

~Bill

I've worked with Poly & Epoxy fiberglass more than I care to admit to.  It's quite fun & not all that expensive to teach yourself in a weekend.  Feel free to drop me a line if you ever want a few tips to get started learning 

~Bill

Thanks for the reply. I used to make surfboards for myself and friends in the past. Wouldn't mind doing some fiberglass work for old times sake. I like to use the finishing resin after the initial layup as it has a wax in it to allow for sanding and a nice smooth finish too. I did look into some carbon fiber cloth instead of glass but would only be for looks. No need for all the strength it offers and a bit on the pricey side. I recommend using the surfboard resins as the are a little more forgiving as they have a good "wet out" property. There is a site online, not sure on the exact name, that has all the supplies and even the colorant to have color throughout the resin. This would be cool for long lasting looks. I agree, working with glass is very easy and rewarding. Just mix the catalyst properly and work quickly.