Anchor System for Hobie Pro Angler- what to get

Hi,

I am new to the Pro Angler.  I would like to buy an anchor system w/ float and trolley system.  I will fish primarily in the Bay and hopefully the ocean (w/ others).  A couple questions:

1. Is there a store that sells good anchor systems (online or physical)?

2. For the PA and the Bay, should I get 2 or 3 lbs?

3. I assume 50' of roap would be sufficient?

Anything else I should be thinking about?  I'm sure this is a real basic question so appreciate the support.

Thanks,

Peter

 

  I don't have the PA (Got an OB) and I use a 5lb (Maybe 10lbs?)  "DanForth" I think is the style

http://www.basspro.com/Bass-Pro-Shops-Navy-Anchor/product/45254/103563

I got mine at my local K-Mart a few years back.  I'm not so sure 2 or 3lbs will be enough for a boat that size.

there are several anchor set ups (DIY) on the site. Search QRAS (quick release anchor system). I am sure you can mod one for the PA

I'd say 5lb is a min. You have a larger boat with more surface to catch wind and current. Will the PA allow you to anchor ass into the current? I am not sure of the boats stern shape.

I use a 5lb (hobie Revo) and if needed I zip tie on a salmon ball or use some chain above the anchor. As for line 50 is prob ok in the bay (OAP, etc). but you are looking at 5-15 feet of water in those areas. Keep in mind the ability of an anchor to hold is more related to the scope (how much line you have) vs the weight of the anchor. You will also want a float (big crab floats work well) on the line in case you have to ditch it in a hurry you can circle back to it and not loose your anchor.

Agree .... it's about scope, not weight.  Allow between 3:1 & 5:1 depending on the windage/shape of the yak.  The float is great, as stated by EWB, so you can release free and come back to it.  Marine places sell snap shackles that allow you to unclip under "load" if required.  They are a bit safer than a "dog leash" snap style.  IMHO

Might even consider a drift sock....

This is great feedback.  I'm really excited to get out in the water on my new (to me) yak!  I hope others benefit from this thread as well.

This is great feedback.  I'm really excited to get out in the water on my new (to me) yak!  I hope others benefit from this thread as well.

Ive been entertaining the idea also.if you get yours rigged up post up some pics and directions on the gearing up thread

This is a photo of CK's anchor trolley that I installed.  It is similar to mine.  I modified it from a kit from Austin Kayak which comes with nice blocks (pulleys), rope, bungees connected to nylon ring, and hardware.  I bought it cheaper, but it now lists for $32.99.  I modified it by using a heavy duty clip and reflective rope on mine.  I also installed a cam cleat on the mounting board to make it a quick release system.  After dropping the anchor, make a loop in the anchor line and pass it through the nylon ring.  Next, hold the loop and use the trolley to move the ring to the front or back depending on how you want to face.  You can set the anchor and secure the line in the cam cleat.  Now I'd half hitch the excess rope twice on the float incase I have to ditch it.  If you need to quickly release your Kayak from the anchor, just pull the rope out of the cam cleat and the loop of line will pass through the ring and you're free.

The anchor I'd recommend is the Chene Anchor.  It weighs only 4 lbs. and it is designed to work with no chains.  It holds on a wide variety of surfaces and pulls out backwards if it gets snagged.  It is overkill for the PA because it is designed for boats 16 to 25 feet long.

nice pic of my yak