Diameter of Hobie Molded Rod Holders?

Looking for a quick answer to how big the opening is for the rod holders are on Hobies.  My guess is around 2 1/2" but need to be sure for a part I want to order to try and build a RAM mount that fits inside the molded in holders.  If I dont get an answer, i'll check when I get home, so no worries

Thanks!!!

AHO

you talking diameter of the flush mounts in the tank well area....1.8 inches. I tuned some tube extensions for them and that's what I got!

Its never as big as you think it is!

Thanks Eric!   

happy pimpage!

  My guess is around 2 1/2"

...1.8 inches. I tuned some tube extensions for them and that's what I got!

Its never as big as you think it is!

happy pimpage!

At the end of the day, this turned out to be quite an entertaining thread

i try.....

Wait till you see what i'm gonna shove down that hole 

It's going to be one dirty ho... bie.

On my Adventure it's 1.79 inches measured with digital calipers....   so the 1.8 seems to be right on... although you can keep telling her it's 2 1/2

Its never as big as you think it is!

TWSS!
somebody had to say it, right