Help, Thru hull wiring kit.

I need one of Hobie thru hull wiring kits. Anybody know a dealer near Modesto that might have one. Tried Headwaters in Lodi and Sunrisemountain in Livermore, neither have one. Hoping to get one today.

Believe there is a dealer in Sonora that you can try.

Believe there is a dealer in Sonora that you can try.

Thanks dildeck. Just got off the phone with them, said I would have to try their Arnold store. Also said they would probably have to order it any way, because that's what they usually do. Little to far any ways.

Don't know that there are any closer, sorry dude!

In a pinch you can just run the wires under the front hatch lid.
I've been doing that for 3 yrs

In a pinch you can just run the wires under the front hatch lid.
I've been doing that for 3 yrs

Looks like that's what I'll be doing till I order the kit on line. Just don't care for the wire running through the foot well.

CCK Oakland has them. They are pretty much a waste IMO. Can get every in it except the thru hull gasket elsewhere The way CCK described the gasket to me , it sounded pretty cheap. Just got an answer on this subject from Hobie.

"That part is called a Lowrance Ready Plug and it’s part number is 86505611"

Glen / G-whiz
What's the part # for the grommet /clamp gasket you got at West Marine?

Just get the RAM mast hole insert for the FF and the wires won't even touch the footwell area.

CCK Oakland has them. They are pretty much a waste IMO. Can get every in it except the thru hull gasket elsewhere The way CCK described the gasket to me , it sounded pretty cheap. Just got an answer on this subject from Hobie.

"That part is called a Lowrance Ready Plug and it’s part number is 86505611"

Glen / G-whiz
What's the part # for the grommet /clamp gasket you got at West Marine?

The only thing I can find at West Marine on line is Ancor Marine through deck wire seal,  part # 764998. Looks like I would have to cut my transducer cable and splice it back together to use it. Not willing to cut the cable, and would suspect not recommended.
If Glen / G-Whis has number that would be great, I'm game. Could be at West Marine in 45 min.
Also the number I have found on line for the Hobie thru hull wiring kit is 86505621. Don't know if this is the right kit now, will have to verify.

Just get the RAM mast hole insert for the FF and the wires won't even touch the footwell area.

Only wish I was rigging a Hobie, Ascend with a DIY scupper mount transducer. Hope
my next yak will be a Hobie. Thanks for the input novofish.