Rod repair / new eyes

I just got three old Calstar rods, but the eyes are broken. Does anyone know of a person / shop that can put new eyes on them around Marin County, or SF?

I have had Roger Vallon restore a few of my rods, and a couple of reels, he does nice work, and is located in Fairfax.

Roger Vallon 415-453-4131 [email protected]

If you don't care about looks and want something quick, cut the old guide off with a razor blade, and use electric tape to put the new one on.  The key is to cut the tape into thinner strips and stretch the tape tight to give in good holding power.  On lighter line rigs, this can last for years.   

Do it your self might be easier than you think.  Two wire coat hangers can be bent to make rod supports on a table, and line is kept under tension by running through a book.  That is how I wrapped my first rod.  It is described in the book:  HOW TO WRAP A ROD With GUDEBROD

If you don't care about looks and want something quick, cut the old guide off with a razor blade, and use electric tape to put the new one on.  The key is to cut the tape into thinner strips and stretch the tape tight to give in good holding power.  On lighter line rigs, this can last for years.   

Do it your self might be easier than you think.  Two wire coat hangers can be bent to make rod supports on a table, and line is kept under tension by running through a book.  That is how I wrapped my first rod.  It is described in the book:  HOW TO WRAP A ROD With GUDEBROD

I had a rod guide break a while back. So, I cut it off, filed down the metal nubs, and duct taped over it. It was the 3rd guide from the end of a rod that I only use for trolling. I've caught several fish since, and have not missed the missing guide...