Need help with trailer

I’ll try to make sense but no promises! 

Get some 1-1/2 square tube steel like (.095 thickness) that can be
U-bolted on top of the frame if there’s room for the T” to clear it if not it will need to be placed under the frame.... it will go out far enough on either side to clear the T”  with “goal post”risers.

On top of the cross tube and pointing straight up  get a shop to weld another tube that’s 4-6 inches that the 1-1/2 tube can slip into kinda  like your trailer hitch does only pointing up.

Have two “goal posts” made that can sit in the receiver tubes (need the shop to weld that) then drill the receiver tubes and uprights for pins.

If you were up here I could literally make that mod in about 2 hours with it welded to the trailer. Likely a one gallon Jack or Jim job 

Thanks!

So you want to fish Oregon? I’m repairing crashe’s Cali trailer today and tomorrow. I’m not a “statist” I’ll weld a trailer no matter the state, although when grinding on a California trailer I have to wear a respirator because as you all know everything in the state of California is known to cause cancer in laboratory animals ! 

omg, I'm dieing. 

Look at the google map and scroll up the coast line 3 bays up to the Columbia River and anywhere off the Columbia. Also join and lurk NWKA. If you don’t already.