Pyramid Anchor setup for a Tarpon 120.

Any of the Sac Crew ever use a Pyramid Anchor setup off the stern of their Tarpon? Looking for something that would work with the factory bolts. Abdiver you out there? thanks!

I can make you a mold out of steel, if you give me the dimensions. Of course then you would have to melt your own lead too.
 

Looking for something that would work with the factory bolts. Abdiver you out there? thanks!

I'll take a look at it but at quick glance if you use the 2 rear rudder bolts on the back along with removing the factory rear handle it will give you two top connection points. This would easily allow you to do something similar to what I have on the Trident "except a bolt together option". To replace the factory wide handle you could use a toggle handle instead(picture below) and attach it to the interior end of the anchor mount. This will still give you the rear handle for carrying purposes.

Or the same kind of concept as above (a SS or aluminum mounting bracket- bolt connection points-ETC.) and use a No. 278 Anchor Lock with Permanent Mount with the lock removed. If you go this route make sure the metal bracket and Anchor lock hang over the back and are angled enough to clear the pyramid anchor in the stow position.