7/14 Tomales Clamming

Since this was posted so long ago; I thought I would post it again. Some of the guys from teams Home Brew and Loose Screw will be meeting up at Lawson's Landing for clamming at 8:20 (7/14) for some minus tide clamming, followed by Halibut hunting at Miller Park.  Company welcome!  Bring a shovel and be prepared to play in the mud.
we will be on channel 69.


Martin

Low tide is at 8:20am so we should meet at the parking lot around 7:00am and launch around 7:30am.

Wed   14     High   1:14 AM     5.6  
         14     Low   8:20 AM    -0.9  
         14     High   2:55 PM     4.9
         14     Low   8:40 PM     1.7

I'll be at Sonny's about 5:45am to car pool there. Thanks for posting. I'll bring a taste of smoked lake trout for sharing. dave...

Checking in with the fellas. I will see you all tomorrow and I also got those tubes for you guys. I did not rig them up yet cause I know some people like to rig their own. Aloha

IslandYak

Fred,
Mahalo!

Checking in with the fellas. I will see you all tomorrow and I also got those tubes for you guys. I did not rig them up yet cause I know some people like to rig their own. Aloha
IslandYak

I'll try to remember to bring some ropes and a cordless drill so you can rig these tube on the spot if you want to 

I'm not setup for clamming but I'll see you around Hog. Good luck

I was really looking forward to playing in the mud with you guys. Unfortunately, we have a deadline here at work that we need to meet. Plus a
big wig from Netherland is coming to check us out and see if we really need
some funding on new equipment. Have fun tomorrow.

Jedmo

Jedmo,
   You will be missed by the "gang", maybe next time.

Martin,
There is a good chance I will see you guys there but I will probably hit Doran after for crabs instead of butts at miller.
 
Only thing that might stop me is a trip to Ft Ross.   Weather forecast is good
 allan

Sorry to miss out Martin
I will be hitting the Ft instead
You guys have fun

Checking in with the fellas. I will see you all tomorrow and I also got those tubes for you guys. I did not rig them up yet cause I know some people like to rig their own. Aloha
IslandYak

I'll try to remember to bring some ropes and a cordless drill so you can rig these tube on the spot if you want to 

Sonny, I did not cut the top and the bottom out of those tubes yet because I don't know how you guys want to rig your tube.

What do you guys use for clamming?  What is the rig your referring too.

What do you guys use for clamming?  What is the rig your referring too.

We're talking about the PVC tube used for clamming.  If you want to join us, just be there.  We'll show you the rope and share the tools.