Crab escspe rings

I have the Promar TR-101 Crab Trap -- 24"x18"x8" Collapsible. the smaller version of the 102.

Im installing the 4.25" escape rings. Where does the law state that these need to be placed exactly? I cant seem to find the info on dfg. Do they go on the sides or the top.

29.80. Gear Restrictions.
(a) General Provisions:
(1) Saltwater crustaceans may be taken by hand.
(2) Nets, traps or other appliances may not be used except as provided in this Section.
(3) It is unlawful to disturb, move, or damage any trap, or remove any saltwater crustacean
from a trap, that belongs to another person without written permission in possession from the
owner of the trap.
(b) Baited hoop nets may be used to take spiny lobsters and all species of crabs. Between
Point Arguello, Santa Barbara County, and the United States-Mexico border, not more than five
baited hoop nets may be fished by a person to take spiny lobster and crab, not to exceed a total
of 10 baited hoop nets fished from any vessel. [see Section 28.65(b) for gear restrictions on
public piers]
(c) Crab traps shall have at least two rigid circular openings of not less than four and onequarter
inches inside diameter so constructed that the lowest portion of each opening is no lower
than five inches from the top of the trap

ok, so i can put them on top, correct...

ok, so i can put them on top, correct...

yup

Thx guys