new trident 13 owner

well mounted my fish finder in finally right i used some more 3mm foam for a gasket on the finder and glued down a foam block under the seat as far back as i could reach, this is so i can use the temp and one less hole in the yak. will post picks soon

Yeah you looked really comfy in that boat out at Del Valle.

Boy, I'm regretting not picking this boat up at ISE!  Really nice looking ride, love your additions! 

they are for the scotty flush mounts i gooped some 3mm foam as a gasket and couldnt get the plugs to stay so i came up with this. this way i dont loose the and they keep extra water out when not in use.

I found the perfect solution for the flush-mount Scotty bases that are open-ended.
Use a rubber tip that's designed for chair legs! If you get the right size, they stick on there perfectly--I can't recall the exact size that works best, but I'll check tonight when I get home. Ace hardware has them for cheap. See attached pic.
PK

Oops! I misunderstood the original question.

NOTE--the chair leg tips are for Scotty flush-mount bases that are open on the bottom....not all of the Scotty bases are sealed/closed. So it essentially becomes a 1" hole in the hull, unless plugged w/a chair tip, duct tape, pvc end-cap, etc.

yea they had the screw on bottom so i filled it with goop and screwed it on sealed, and a side note i am changing to the scupper transducer cause i was getting some real werid readings this weekend or i did it wrong oh well. and i caught my first fish of 2009 this week end 13" brown fly fishing woohoo