Welcome, Guest. Please login or register.
March 29, 2024, 06:08:49 AM

Login with username, password and session length

Recent Topics

[March 28, 2024, 11:47:21 PM]

[March 28, 2024, 11:34:08 PM]

[March 28, 2024, 09:44:18 PM]

[March 28, 2024, 09:12:36 PM]

[March 28, 2024, 07:11:09 PM]

[March 28, 2024, 01:13:46 PM]

[March 27, 2024, 07:25:42 PM]

[March 27, 2024, 07:05:39 PM]

[March 27, 2024, 12:35:34 PM]

[March 27, 2024, 11:18:23 AM]

[March 26, 2024, 07:45:07 PM]

[March 26, 2024, 06:19:03 PM]

[March 26, 2024, 05:47:06 PM]

Support NCKA

Support the site by making a donation.

Topic: Mounting Hardware for Transducer in Lowrance Transducer Plate for 17 Outback  (Read 727 times)

0 Members and 1 Guest are viewing this topic.

sacyakattack

  • Sand Dab
  • **
  • View Profile
  • Location: Sacramento
  • Date Registered: Aug 2015
  • Posts: 86
Hi all--

Does anyone have the mounting hardware in the top picture below? I am working with CCK to see if we can find it, but figured I'd see if anyone on here has a set they aren't using or are willing to sell. Please let me know. Thank you!


scooter

  • Salmon
  • ***
  • View Profile
  • Location: shingle springs
  • Date Registered: Jul 2013
  • Posts: 292
Is that the hardware to hold the transducer in the pocket of a hobie? I ask because I just put my loweance elite 5 on my revo 13. My transducer seemed to fit nice and snug sandwiched above the removable skid plate so I didn't even have to bolt it down it seemed made to fit my model transducer.


sacyakattack

  • Sand Dab
  • **
  • View Profile
  • Location: Sacramento
  • Date Registered: Aug 2015
  • Posts: 86
Yes it is. I jerry rigged mine but its sitting flush against the plate which I don't like. I wanted to have a little bit of space so water could get between the the transducer and the plate. I honestly don't know if it will make a big difference but I am very OCD about those kinds of things. Has the ff been reading OK in your revo?


scooter

  • Salmon
  • ***
  • View Profile
  • Location: shingle springs
  • Date Registered: Jul 2013
  • Posts: 292
I literally just put it on last night, I will be taking it this weekend out so I will let you know, it just seemed like it sat parallel to the water surface because the bottom is flat with the plate. It seems like it will all flood no problem. Then I made a little bracket to hold the head off to the side of the mesh pocket. I was scared to drill any new holes so I made one that fit up to existing holes of pocket with 1" round ball on top for ram adapter. I will check around for left over hardware for you


scooter

  • Salmon
  • ***
  • View Profile
  • Location: shingle springs
  • Date Registered: Jul 2013
  • Posts: 292
Pic